7 best network and battery pack renovators

Renovators, also called multitools, are very popular due to the versatility of their application. Find out from our rating based on customer reviews and technical data of the tool which renovator is best to buy for various operations.

top renovators rating

Top Network Renovators

Network renovators are powered by 220 V power, which allows manufacturers to supply their engines with power from 300 to 1200 watts. Such a potential provides a greater number of oscillations, the maximum limit of which reaches 35,000 per minute. Thanks to this indicator, multitools are able to cut materials of different hardness faster.

The second advantage of network renovators is low weight. It varies from 1 to 1.6 kg, which facilitates the load on the hands for a long time. It is easier to control with arms extended forward or above the head. The third advantage of a network cable renovator is its compact design. Only a handle is provided on the back, so it’s easier for them to crawl into hard-to-reach places and easier to lay for transportation and storage.

Such models of renovators are best for carpentry on a workbench in a stationary workshop, furniture manufacturing, repair work in an apartment and a house (trimming skirting boards, linoleum, plastic). This tool is indispensable for preparing surfaces for painting, unbuttoning tile seams and trimming, installing plumbing.

  Bosch PMF 350 CES sBlackDecker MT 300 KA sDeWALT DWE 315 sAEG OMNI 300 KIT1 s
Bosch PMF 350 CES Black + Decker MT 300 KA DeWALT DWE 315 AEG OMNI 300-KIT1
 
 
Power, W  350 300  300  300
Weight, kg 1,6 1,6 1,5 1,5
Smooth start no no yes no
Possibility of connecting to a vacuum cleaner yes yes yes no
Maintaining constant revolutions under load  yes  yes  no  no

Bosch PMF 350 CES

German renovator with assembly in Europe. It has a power of 350 W and an angle of oscillation of 2.8 degrees. The change of nozzles is carried out without a key. The second handle moves on either side and makes it easier to hold.

Bosch PMF 350 CES

Bosch PMF 350 CES 1m

 Bosch PMF 350 CES 2m

 

+ Pros of Bosch PMF 350 CES

  1. The clamp on the body for tightening the nozzle fits into the groove and does not bulge out - during manipulations it will not catch on the walls or clothes.
  2. The holding place and the second handle are rubberized.
  3. Light weight 1.6 kg does not tire your hands.
  4. It is delivered in a strong case with 10 nozzles.
  5. There is a dust removal module.
  6. A flashlight with an angle of illumination of 180 degrees is integrated into the end face - in a room with poor light, not only the place of impact is visible.
  7. Submersible sheets have a rounded edge, which facilitates entry into solid material.
  8. There is a four-position depth gauge.

 

- Cons Bosch PMF 350 CES

  1. The cost is one of the highest.
  2. There is no soft start system - for very precise cutouts you need to train for a long time, otherwise you can spoil the material.
  3. The grinding nozzle is bad and quickly disintegrates after several uses - it exfoliates from Velcro.
  4. When setting a low frequency for metal cutting, the oscillations drop only to 8000, so it shakes violently and it is difficult to get straight to the intended line.
  5. A short cord that needs a long carry.

Conclusion. This is the best renovator for laying water and sewer pipes, heating installation. With its help, it is easy to cut a hole in the wall, drywall, shorten the plastic pipe, cut off the protruding reinforcement. For cleanliness, it is connected to a vacuum cleaner, therefore it leaves a minimum of debris even when sawing concrete.

 

Black + Decker MT 300 KA

Renovator from an American brand going to a factory in China. The power of the tool is 300 W, the oscillation frequency varies from 10,000 to 22,000 per minute. It is completed with a case and 11 nozzles.

BlackDecker MT 300 KA

BlackDecker MT 300 KA 1m

 BlackDecker MT 300 KA 2m

 

+ Pros Black + Decker MT 300 KA

  1. Reasonable cost in comparison with German goods.
  2. The number of revolutions is electronically controlled by a switch on the end of the housing.
  3. The whole body is rubberized - in hot weather, the renovator does not slip out of his hands.
  4. Not a very loud job.
  5. There is a tube for connecting a vacuum cleaner - sawdust, chips and concrete dust are easily removed.
  6. It is not difficult to get to the corners to clean the surface or to cut.
  7. Good assembly without gaps and hangs.
  8. A capacious case where the set of nozzles and carrying easily will fit.
  9. Wearproof materials in a design.

 

- Cons Black + Decker MT 300 KA

  1. To change the non-original nozzle, you need to use a key - on the renovator only locking of the shaft is provided.
  2. Original components are replaced by a quick-release method, but the lock spring is very tight.
  3. The impeller is assembled integrally with the engine armature, therefore, when repairing, you need to buy the entire assembly at once.
  4. The metal parts of the gearbox heat up during operation, and if you touch them with your bare hands, it will be unpleasant.
  5. There are very few original nozzles on sale - you have to use an adapter and consumables from other manufacturers.
  6. The instructions for use indicate that there are 7 pieces of cutters in the kit, and in fact only 4.

Conclusion. The model is well suited for work in a carpentry workshop due to the 3 m wire length, which will facilitate movement around a workbench or large furniture without carrying with a socket. The tip of the renovator's gearbox is very small, so it will not be difficult to bring the tool into the corner for grinding or cutting grooves. The adapter in the kit will provide the installation of nozzles of complex shape from any manufacturers.

 

DeWALT DWE 315

300 W renovator with electronic speed control and 4 mm platform travel. The oscillation frequency is set from 0 to 22000 per minute. Has a long trigger for clamping with all fingers or just one.

DeWALT DWE 315

DeWALT DWE 315 1m

 DeWALT DWE 315 2m

 

+ Pros of DeWALT DWE 315

  1. In the event of a tool falling out of hand, it turns off automatically, since the start button ceases to hold.
  2. Two rubberized parts for the hands.
  3. The lock from accidental start-up and to facilitate the long pull of the trigger with long cuts.
  4. One-touch file setting by pressing on the clip.
  5. The diode illumination in the end zone is precisely directed to the working area.
  6. Long cable 2.5 m.
  7. Light weight 1.48 kg.
  8. Soft start system with increasing speed.
  9. There is an adapter for installing nozzles from other manufacturers.

 

- Cons DeWALT DWE 315

  1. When cutting solid materials, revolutions can float.
  2. The cost is two times higher than analogues with the same characteristics.
  3. The edges of the substrate quickly grind and the nozzles become dull.
  4. An elongated head can interfere when grinding with a triangle, when you need to process the surface of the walls in the house from logs.
  5. Noisy work, so it can only be used with headphones.
  6. When working with wood, it heats it very much - smoke appears that interferes with manipulations.

Conclusion. Renovator is suitable for trimming skirting boards, cornices, finishing materials for walls and ceilings, linoleum. For all this, 28 nozzles are supplied immediately. A soft start will ensure the exact start of the cut along the intended line.

 

AEG OMNI 300-KIT1

Compact renovator with a wide start key, pressing which controls the number of revolutions. The power of the tool is 300 watts, and the angle of oscillation is 1.5 degrees.

AEG OMNI 300 KIT1

AEG OMNI 300 KIT1 1m

 AEG OMNI 300 KIT1 2m

 

+ Pros AEG OMNI 300-KIT1

  1. It is completed with a beautiful bag and 13 nozzles, including an immersion knife, a grinding sole and a cutter for a cut flush.
  2. There is a good diode backlight under the head, just falling on the working area.
  3. You can serve yourself - the windows for replacing the brushes are easily screwed out.
  4. Compatible with consumables from any manufacturer.
  5. Long and soft wire.
  6. The head can be rotated 90 degrees, which will facilitate work on the wall, floor or ceiling - a quick change due to mounting on latches.
  7. The equipment is fixed very reliably and will never fly off, no matter how strong the load.
  8. Quickly cuts through windows in drywall and wood.

 

- Cons AEG OMNI 300-KIT1

  1. There is no soft start - it will not be suitable for particularly precise cuts, and you will have to bring the result with a chisel.
  2. Nozzles are replaced by a key - with a frequent transition from one material to another, time will be lost.
  3. Replaceable heads are expensive.
  4. The start key is not fixed, and keeping it pressed for a long time is tiring.
  5. When cutting metal with a thickness of 3 mm, it is required to allow to cool - not to be performed at a time.
  6. At first it smells a lot of plastic.

Conclusion. A good renovator for sanding wood or metal before painting, removing old glue, mortar when dismantling tiles. It is equipped with 10 sanding sheets under the delta, which is enough for a long time. Compact dimensions allow you to perform most operations with one hand.

 
What network renovator did you decide to buy?

Best Battery Renovators

Models with a rechargeable battery are available with a power of about 300 W, provided that an 18 V battery is connected to the battery. There are less powerful renovators (10-12 V), but they are suitable only for very simple tasks. The vibration frequency of multitools with a battery reaches 20,000 per minute. But the weight is much more network. This indicator varies from 1.5 to 2.5 kg.

The presence of the battery affects the dimensions, for the main advantage of such models is the autonomy and the absence of stretching cords. Due to these advantages, the tool is well suited for those who have to perform many small tasks on a large object - using a battery-powered renovator does not require carrying a carry each time, which contributes to productivity.

They are also optimal for repair and construction teams at facilities not connected to electricity. Thanks to mobility, the tool is good for working on the road and even in the field. Here is the rating of battery renovators that have proven themselves well among users.

 AEG OMNI 18C LI 202BKIT1X s Dewalt DCS355N sRyobi ONERMT1801M s 
AEG OMNI 18C LI-202BKIT1X Dewalt DCS355N Ryobi ONE + RMT1801M
 
 
Voltage  18 18  18
Weight (without battery), kg 0,55 1,06 0,9
The number of batteries in the kit, pcs 2 0 0
The number of nozzles in the set, pcs 15 29 9
Oscillation frequency, count / min 0-20000 0-20000 0-20000
Smooth start no no no

AEG OMNI 18C LI-202BKIT1X

Renovator from a German manufacturer, equipped with two 2.0 mAh Li-lon batteries. Without a battery, it weighs 545 g, and with it 1.8 kg. It has an oscillation angle of 1.5 degrees and is powered by 18 V.

AEG OMNI 18C LI 202BKIT1X

AEG OMNI 18C LI 202BKIT1X 1m

AEG OMNI 18C LI 202BKIT1X 2m

 

+ Pros AEG OMNI 18C LI-202BKIT1X

  1. It comes fully equipped with a charger and two batteries - while working with one, the second can be charged, which gives a supply of food for the whole day.
  2. Easy tool change with hinged clamp.
  3. It is possible to rearrange the head on the latches on the corner.
  4. The battery has a steel clip for hanging the tool on the belt.
  5. One-touch battery replacement.
  6. LED backlight shines exactly in place of the cut.
  7. Convenient for one-handed operation.
  8. The submersible knife is inserted without protruding parts (the blade will be the most extreme lateral point), so the depth of the cut at the corner of the material is not limited.
  9. Well-chosen weight distribution with a gearbox on one side and a battery on the other.

 

- Cons AEG OMNI 18C LI-202BKIT1X

  1. There is no soft starter system.
  2. When trimming the ceiling, hands get tired quickly and it is inconvenient to manipulate due to a bulging battery.
  3. The cost is much more expensive than the network counterpart.
  4. There are no head nozzles with a gearbox and disk rotation like a grinder.
  5. With prolonged use, it overheats, so you need to give time to cool.
  6. There is little space for emphasis with the second hand and it is not rubberized.

Conclusion. The renovator comes with two batteries with a capacity of 2.0 mA / h, which does not require additional investment. Thanks to an oscillation frequency of 20,000 counts / min, it easily cuts off a metal or wooden edge, plastic, and a roomy, durable bag allows you to carry it with you.

 

Dewalt DCS355N

Powerful battery-powered renovator, not inferior to 300W network models. It has a wide start key with a lock and a lock for pressing. The housing is equipped with numerous rubber pads that reduce vibration.

Dewalt DCS355N

Dewalt DCS355N 1m

 Dewalt DCS355N 2m

 

+ Pros of Dewalt DCS355N

  1. The brushless motor warms less and lasts longer.
  2. Bright LED backlight.
  3. It immediately turns off if it accidentally falls out of hand.
  4. Easy installation of saw blades by pressing the latch.
  5. Speed ​​adjustment is carried out by the force of pressure on the trigger, so you can quickly adjust the course of work depending on the density and thickness of the part.
  6. It copes well with cutting windows, cutting skirting boards, cutting grooves.
  7. Cuts plastic like paper at 20,000 vibrations.

 

- Cons Dewalt DCS355N

  1. It is delivered in a box, and you need to decide where to store supplies.
  2. The kit does not have a battery and charger, which will require additional investments.
  3. A flat battery mounted perpendicularly to the housing makes it difficult to manipulate its protruding portion.
  4. Out of these 29 nozzles, the set actually contains only three files, and the rest are sanding skins.
  5. The cutting elements from the kit are quickly dull and it is better to immediately buy others.
  6. Sawing very loudly.
  7. In order for nozzles from other manufacturers to fit along the width of the slot, it is necessary to additionally saw them with a grinder.

Conclusion. Such a renovator is the best for gating walls in a house or apartment for wiring. Thanks to the battery, this can be done even in a room where there is no electricity. Brushless motor technology eliminates overheating and contributes to increased productivity.

 

Ryobi ONE + RMT1801M

The compact battery-powered renovator is comfortable for one hand. There is a magnetic plate on the platform for the battery to fix other accessories or cut metal elements.

Ryobi ONERMT1801M

Ryobi ONERMT1801M 1m

 Ryobi ONERMT1801M 2m

 

+ Pros of Ryobi ONE + RMT1801M

  1. Reasonable price in this category of tool.
  2. Rubber pads over the entire surface of the handle.
  3. Powerful LED backlight.
  4. Batteries come from other tools of the same manufacturer, so you can save money if you already have a drill or a Ryobi reciprocating saw in the house.
  5. 20,000 vibrations per minute accelerate the cutting of light materials.
  6. Files are suitable from all manufacturers.
  7. Vibration is almost not felt, even if you work with blunt consumable elements.
  8. It is easy to dismantle slopes on interior doors.
  9. Almost does not heat up and consumes a charge economically.

 

- Cons Ryobi ONE + RMT1801M

  1. To replace the file, it is necessary to untwist the fixing nut with a wrench.
  2. Sold without batteries.
  3. There is no case or bag - only cardboard packaging, which is not suitable for the mobile use of a renovator.
  4. There is a noticeable backlash of the head.
  5. Some users occasionally break the start key.
  6. Metal parts are cut with difficulty.

Conclusion. The working part of the renovator can be rotated, which is convenient for working in different positions and inaccessible places.

 
What battery renovator did you decide to buy?

The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.